Air Handling Full Blast gates
3"-24" are constructed of
aluminum castings with a galvanized
steel slide blade. Gates can be
disassembled for cleaning.
Full Blast gates are used to balance
the air going from one branch to
another branch. When another machine
is used for only part of the
workday, you can close the Blast gate
and divert the air to another
machine. |
Half Gates have
the same construction and quality as
the Full Blast gate.
Use Half gates when working with
wood containing a lot of pitch (it
prevents the pitch from clogging the
slide track)
Half Gate is easily installed in
existing ductwork by cutting a slot
halfway around the duct and sliding
the 20 Gauge blade into the opening,
then pop riveting the casting to the
outside of the duct. |
